Strap Installation Guide
How do I install my strap safely?
We recommend taking your time and using quality tools when changing your strap. Refer to the step-by-step guide below.
Disclaimer: Improper installation or removal may damage your watch, strap or spring bars. We are not liable for any damage during strap changes. If unsure or dealing with tight tolerances, seek professional assistance.
Installation
-
1. Prepare the Watch
Apply low-tack tape to both lugs to protect the case from scratches. Work on a soft, clean surface with good lighting.
-
2. Install the Strap
Position one end of the spring bar into the lug hole. Using a spring bar tool, compress the opposite end and guide it into place. Gently wiggle the strap until you feel or hear the spring bar click into the lug hole.
-
3. Final Check
Gently pull the strap downward and sideways to confirm the spring bar is fully seated. Repeat for the other side.
What are quick-release spring bars?
Quick-release spring bars are spring bars fitted with small integrated levers that allow the bar to be compressed by hand. This makes it easier to install or remove straps and bracelets without using traditional spring bar tools, while disengaging the bar safely from the watch case.
Are spring bars included?
Yes, spring bars are included with every strap purchase and are sized according to the selected lug width.